Classic Composition Mount
Model QMSC (Made in the USA and Canada)
Features
- ICC-ES certified
- One bolt installation
- No shingle cutting
- 100% IBC, UBC compliant
- Meets or exceeds roofing industry best practices
- 3934 lbs. average pullout (Douglas fir); 4365 lbs. average shear
- All aluminum flashing and mount
- Stainless steel hardware (included)
- 10-year warranty; 50-year expected life
- Works with all leading racks
- Won't void roof manufacturer's warranty
- Approved for use by leading roof manufacturers
- Patent numbers 7,762,027 & 7,895,808
- ICC-ES certification pending in Canadian production.
Available Finishes
- Aluminum mill
- Clear anodized
- Bronze anodized
See more detail
Our best-selling roof mounts use our patented technology to form the easiest, fastest, most universally code-compliant watertight mount available for composition roofs. The Classic Composition Mount is backed by solid engineering and certified by the ICC-ES (ICC-ESR-2835)*.
There's no need for trimming shingles to force a fit. Drill one pilot hole into the rafter, backfill it with appropriate sealant, slide the Quick Mount flashing beneath the felt in the course above, drive the bolt home, and it's done.
The 12 x 12-inch Classic Composition Mount flashing is designed to fit within a standard 5 to 5.5" course and the exposed course should be no greater than 5.75". If the exposure is greater than this, use the Shake Mount as an alternative. There's no shingle cutting and no shingle distortion caused by trying to force a fit. Just a permanent, watertight mount every time!
PV, Solar Hot Water, and More
The Quick Mount PV Classic Composition Mount is the logical choice not only for solar PV installation, but also for rooftop solar hot water systems. In fact, whatever you need to fasten to a composition roof – HVAC equipment, antennas, satellite dishes – use Quick Mount PV to secure and protect every roof installation you put your name on.
*ICC-ES certification pending in Canadian production.
Parts and Materials
Each mount kit (12 per box) includes:
- Cast aluminum mounting block (2-1/4" L x 1-1/4" W x 1-1/4" H) bonded with .05" thick, 12" x 12" aluminum flashing
- Hanger bolt, 5/16" x 6" (1-1/4" machine, 1-3/4" shank, 3" lag)
- Stainless steel and EPDM rubber sealing washer, 3/4" x 5/16"
- Two 5/16" hex nuts
- EPDM sealing washer with 60 Durometer hardness
- Stainless steel flat washer, 1" x 5/16"
Specifications
| Flashing size | 12" x 12" |
|---|---|
| Pullout/shear | 3934 lbs. average pullout (Douglas fir); 4365 lbs. average shear |
| Tools needed for installation |
|
| Applicable roof types | Standard and high-definition composition and wood shingle roofs with 5" to 5/12" courses |
| Available finishes |
|
| Compatible racks |
